Motorcycle Diaper Cake Tutorial {DIY-How to Make a Diaper Motorcycle}

The first motorcycle diaper cake tutorial in history!

Step by step detailed instructions on how to make this super sweet gift.

Try it out!

I finally decided to share a tutorial on how to make this beautiful diaper motorcycle (Diaper cake). I hope you enjoy it! This would be the greatest baby shower gift ever! I promise you that :) Email me if you have any questions!

**This tutorial is for personal use only. Make as many as you want for yourself or to give as a gift. Instructions and pictures are not to be copied or duplicated. You can place my link on your blog/website if you would like to share this tutorial. Thank you! {wink}**

Materials: 34 diapers Pampers Swaddlers Size 1 (17 for each tire), 8" cake pan, 2 rubber bands, 2 receiving blankets (30x30 approx), 2 bibs, 1 chain link toy, a pair of socks or mittens, a baby bottle, 1 washcloth, scissors, pins, a stuffed animal (size approx between 15" and up to 20"), and decorative ribbon.

Make sure the gab between each diaper is even. See above picture #5? They are not even.

Pic #6: With one hand on top of the diaper, use the other hand to start pulling each diaper to the right until they all are even. Pic #7 is looking better...but pic #8 is perfect!

For pic #13: wrap each tire with ribbon of your choice. Place a pink to secure ribbon. The pin will at be the bottom of the tire. Do the same for the other tire. PLEASE NOTICE THAT THE FOLLOWING PICTURES DON'T HAVE THE RIBBON AROUND THE TIRES BECAUSE I FORGOT!!! I WAS TOO EXCITED! But make sure the ribbon is around the tires for the rest of the instructions. :)

Pic #14: Fold first receiving blanket in half...and roll it up like in pic #15 

Pic #16: If you want you can secure the end of the rolled up blanket with a pin just until you place the blanket through the tire opening.  

Picture #20: PLEASE note that we are working on the BACK tire.

For pic #24: Pull both ends of the blanket (following the arrows) to make sure the 2 tires are tight and the blanket too. Not too tight but firm. This will hold your entire motorcycle! Remember we are still working on the back tire.

For pic #25 place a pin in the inside of the tire opening securing the 2 blankets against the diapers. Make sure the pin is all the way in! then tuck in the remaining of the 2 ends of the blanket in the opining of the tire. You can see the finished back tire on Pic# 29.

Pic #26 shows the front tire first.

We are going to work on the handle now...Pic #28: roll up the second blanket...

Pic #29: Place the rolled up blanket through the opening of the FRONT tire.

Pic #35: If you would like you can roll up the wash cloth around the baby bottle.

To make the handle bars more stable follow instructions on pic #37 and #38

Pic #39: Put tissue paper inside the sock or mittens...it just looks better!

Pic #42: Place the other bib on top of the back tire.

 What do you think???!!!

Thank you for taking the time to visit my website!

For more cute tutorials and to follow my journey into nursing school (and mommyhood) click here to like my page on facebook.

Thank you!!! {{SMILE}}